Search
Carbide Rod
Features
1.Excellent wear resistance & high toughness.
2.Good thermal & chemical stability.
3.Anti-deformation & deflection.
4.Hot Isostatic Press (HIP) process provides quality improvement to the finished products to ensure material reliability.
5. Strict tolerance extent control.



Tungsten carbide rod is mainly used in making or welding the drill bit, end mill, reamer, graver,integral vertical milling cutter and special cutter for automobile, printed circuit board, engine, etc. 

Besides, they can be used for making of cemented carbide stamping head, core bar and perforation tools. 

 


Available Size:

Standard rods with one, two, or three holes, straight or twisted to a 30 or 40 degree helix, or solid with no holes. All rods are available in standard lengths of 310 and 330 mm.

Custom lengths available by request.

 


Grade and Applications

 

Grade

Equal to ISO Category Number

Performance

 

Applications recommended

 

Density

Bend Strength

Hardness

G/Cm3

N/mm2

HRA

YG6X

K10

14.8-15.1

1560

≥91.0

Its wear resistance is higher than YG6. Suitable for processing hard wood, original wood, aluminum section bars, brass rod and cast iron.

YG8

K20-K30

14.6-14.9

2400

≥89.0

Suitable for rough machining of cast iron, non-ferrous metal, drawing of steel, geology drilling use, tools for wood working blade and wearing parts.

YG10X

K30-K40

14.6-14.9

3400

≥92.5

Recommended for manufacturing of all types of drills, end mills, burrs, etc, suitable for the hole machining of steels, gray cast iron, stainless steel and heat-resistance alloy.

YL10.2

K30-M30

14.42

3500

≥92.5

Classical grade for general applications. Suitable for machining of common steel, cast iron, stainless  steel.  

Recommended to make tools such as twist drills, end mills, screw taps, gun drills, etc.

YW1

M10

13.0

1710

≥92.5

   High red hardness, resistant to impact load. A good grade for general purposes Machining of ordinary steel, cast irons and hard to machining materials such as refractory steel manageress steel, and stainless steel. 

YT5

P30

12.9

2200

≥90.5

     Best strength and height impact & shock resistance among W-Co-Ti alloys but wear resistance comparatively lower. Rough turning, rough planning and half precision planning of carbon steel and alloy steel, including forged steel parts, stamped parts and cast iron surfaces

 

 


Product Search
脚注信息
Copyright © 2008  Asia Diamond Industry Co.,Ltd.  All Rights Reserved
Contact Us:  info@aditool.com; aditool@foxmail.com